Home |  News |  Our Company |  Contact |  Registration |  Useful Links |  Collaborations |  Imprint |  Sitemap    
  Tuesday, 2nd September 2014     PrintversionStatus: not logged in - log in    






 
High Voltage Switches

Low Noise High Voltage Switch of the HS series    Input/Output Scheme of the HS devices
Left: Low Noise High Voltage Switch of the HS series. Please click for detail views.
Right: Input/Output Scheme of the HS devices (click to enlarge).
Purpose of these devices is fast switching of electrostatic lenses, beam deflectors or ion traps. Unlike DC power switches, the outputs expect capacitive loads. The HS series switches are housed in standard 19-inch rack-mount cases, available in single-channel or dual-channels versions.

Key features:
  • Very low noise switches
  • Fast switching time (25...100ns)
  • 200V to 1000V range, model dependent (higher voltages on request)
  • for Electrodes, Ion traps, Beam Lines, Fast Steerers, Piezos
For more details please refer to the user manuals and datasheets:
HS-200 User Manual pdf, 1.33 MB
HS-500 User Manual pdf, 1.34 MB | HS-500 Datasheet pdf, 720 KB
HS-1000 User Manual pdf, 2.48 MB | HS-1000 Datasheet pdf, 1.29 MB

 

Low Noise Switches

Low Noise Switch LS-30
Low Noise Switch LS-30.
Please click for detail views.
Purpose of the new LS-30 devices is the fast switching of electrodes, electrostatic lenses, beam deflectors or ion traps. Unlike DC power switches, the outputs expect capacitive loads in the 100pF range. The outputs are optimized for high stability and very low noise. The switches are housed in standard 19- inch rack-mount cases. They are available in single-channel to triple channels versions. Individual switches are completely independent except that they share a common GND.

Key features:
  • Low noise switches
  • Fast switching time
  • +/-15V range
  • for Electrodes, Ion traps
For more details please refer to the user manual: pdf, 4.55 MB

 
Status: 01.09.2014 to the top